Norglass Marine

Norglass Marine Paints

Australian made, Australian owned, for Australian conditions.

A paste-like white, waterproof filler that can be sanded and left as a finish, or painted over. Norfill has excellent non-sagging properties so that even large cracks or holes can be filled in one application. Norfill is solventless and does not shrink, making it the perfect filler where strength and adhesion is important. May be applied to all prepared surfaces and will not react with other coatings or treatments.

Water clear pour-on glass finish for bar and table tops. Gives that ‘liquid glass look’ and can be used for découpage applications. Other uses are for laminating fibreglass, Dynel and other composite reinforcings. Excellent adhesion, abrasion resistance and flexibility.

A water clear epoxy solution designed to penetrate, seal and waterproof particle boards and timbers. Recommended to be overcoated with a primer such as Shipshape within 4 weeks of application. In permanently shaded areas Norseal can alternatively be coated with a clear finish.

A very fast drying primer with excellent corrosion inhibiting pigment for ferrous and non-ferrous metals. Because of its outstanding adhesion to almost every surface NoRust is the preferred primer for most paint systems. Suitable for all areas other than those of continuous immersion.

The ultimate high-build performance coating to obliterate background irregularities and provide filling properties prior to coating with single or 2 pack finishes. Suitable for areas of continuous immersion and osmosis repairs. Commonly used as a primer-undercoat and as a topcoat in the bilge areas of boats because of its satin gloss finish.

A tough abrasion resistant gloss coating with high levels of U.V inhibitors for interior and exterior use. Ideal for floors, furniture and marine applications. Also available in satin finish for interiors to produce a natural lustre.

A modified synthetic resin coating for feeding the timber where a natural grain appearance is desired. Contains U/V inhibitors for additional protection. Fast drying and does not leave a greasy film. Excellent penetration into open grained woods. For use on decks, floors and furniture.

A fine silica powder designed to absorb the gloss of Norglass paint films converting them into a satin finish. Addition rate of 100g for 4 litres of paint, 25g for 1 litre. More or less can be added to achieve the desired gloss level.

A dense red oxide, 2 pack epoxy primer for metal surfaces. Contains leafing pigments for excellent anti-corrosive performance. Can be used on areas of continuous immersion as well as high rise structures.

A balanced blend of premium raw materials to produce the highest quality marine grade enamel. For use on prepared steel, aluminium, concrete, timber and other surfaces where performance and durability is paramount.

A heavy-bodied off-white general purpose primer and combined undercoat with fast drying and the easiest of sanding properties. The superfine texture of Weatherfast PRi-COAT makes this the ideal preparation coating for timbers and many other surfaces. PRi-COAT is low in odour when used in confined spaces and is fast drying.

The premium two-pack aliphatic linear polyurethane for durability and fade resistance. Excellent chemical, waterproofing and weathering properties. Ideal for refurbishing most surfaces and where a superior long lasting coating is required. Home, leisure, commercial, industry and suitable as a food grade coating.

For restoring the natural colour of timber prior to clear coating. It can also be used for removing stains on fibreglass surfaces.

A citrus style paint stripping gel using the latest technologies in resins and additives for high performance.

Some of the most inspired creations from the Norglass Liquid Glass epoxy resin.

The Paint Experts. 0266221147